Baroque Gold Leaf Armchair with Carved Urn Cresting

Architecturally, the Baroque Gold Leaf Armchair with Carved Urn Cresting resolves its massing through a high-back “Cathedral” geometry designed to frame the sitter in regal isolation. The structural load is distributed through heavy cabriole legs topped with grotesque masks, grounding the visual weight of the ornate upper register. This piece is calibrated for high-impact Baroque interiors, serving as a primary focal point in foyers or as the head-of-table anchor.

Aesthetic & Proportion Analysis

The visual hierarchy is dominated by the central “Urn and Floral” motif pierced through the crest rail, a masterwork of negative space carving. This is flanked by sweeping acanthus scrolls that transition into the “wings” of the chair. The upholstery employs a dual-textile strategy: structural Mauve Velvet is “ruched” (pleated) along the wings and arm pads to create horizontal rhythm, while the center back and seat cushion feature a silver-toned Floral Jacquard to reflect light and break the density of the velvet.

Material Engineering & Construction Logic

The internal substrate relies on Kiln-dried Beech (Moisture content <12%) to ensure the delicate pierced carvings of the urn do not fracture under environmental stress. The surface finish utilizes a traditional water-gilding technique, where gold leaf is burnished over a red bole clay base to achieve a museum-quality depth. Learn more about our artisan gilding protocols.

• Joinery: Reinforced dowel and mortise joints at the arm-to-post junction to support the heavy lion-head terminals.
• Upholstery mechanics: The seat utilizes a coil-sprung suspension system, topped with high-density reflex foam (>45kg/m³) to maintain the crowned profile of the box cushion.
• Carving Depth: The relief carving on the apron and legs exceeds 45mm in depth, requiring solid timber blocks rather than appliqué techniques.

Spatial Integration

This armchair functions as a sculptural object. Its scale (approx. 1450mm height) demands vertical clearance and should be placed against a wall or in a corner where its silhouette can be appreciated without obstructing sightlines across a room.

OEM / Bespoke Services

• Fabric customization (Royal Blue Velvet, Red Damask, or Leather).
• Finish adjustment (Antique Silver, Walnut with Gold Accents).
• Start your bespoke furniture journey to commission a matching 2-seater settee or footstool.

Frequently Asked Questions

• Q: Is the pierced carving on the crest fragile?
  A: While visually delicate, the carving is executed in solid beech wood with grain direction optimized for strength. However, we advise against lifting the chair by the crest rail; always lift from the base.
• Q: Can the ruched velvet be replaced with flat upholstery?
  A: Yes. The ruching is a decorative choice. For a cleaner, more modern look, we can upholster the wings and arms with flat, tight-pulled fabric or leather.
• Q: How do I clean the gold leaf lion heads on the arms?
  A: The arm terminals are high-contact areas. We seal them with a hard-wearing lacquer. Clean with a soft, dry cloth; avoid ring jewelry which might scratch the finish over time.